Shock Absorbers

SHOCK absorbers absorb the SHOCK from fast motor spin-up of rotary pumps, when
a controlled throttle, returning to inlet, is not in circuit.

SHOCK absorbers alleviates fluctuating flow gradually, preventing hammer,
by progressively arresting the liquid; IE over more time.

SHOCK absorbers often used in thermal compensation, so that there is a place
for some to come from and go to when the change volume occurs.

SHOCK absorbers for evening out the SHOCK when your pumps are switched on,
these absorbers of SHOCK are connected close after pump outlet check valve.

SHOCK absorbers for suppression of a SHOCK in piping with jerking fluids, work
by cushioning the mass oscillation to stabilize the reciprocation.

SHOCK absorbers stop transient from valve slam, quick isolation,
are of greatest effect, put on a Tee in front of the slammer.

SHOCK absorbers damping system over-pressure during quick start-up,
by being in place of flow back bypasses, normally returning to source.

SHOCK absorbers attenuate hammer from reverse flow on sudden shut-down,
by being increasing resistances to the quantity of fluid coming back.

Shock Absorber

SHOCK absorber damps system peak pressures whilst quickly starting-up, when
placed instead of a back flow bypass, which would be returning the
instantaneous excess.

SHOCK absorber reduces transients from quick valve closure, safety shut-down
are of greatest effect, put on a Tee in front of the slammer.

SHOCK absorber absorbs water hammer from reverse flow immediate stopping, by
increasing cushion resistances to the returning quantity of fluid.

SHOCK absorber suppresses the SHOCK from pump motor spin-up and pipe shake.
when there is no controlled throttle returning to inlet, in circuit.

SHOCK absorber alleviates fluctuating flow gradually, preventing hammer,
by progressively slowing the liquid; EX, a time increase reduces SHOCK level.

SHOCK absorber applications compensating for liquid expansion by temperature ,
so that there is a place for some to go into when system increases.

SHOCK absorber for suppressing a flow SHOCK in pipe that is being shaken,
stops the vibration by de-tuning the nodes, softness lowering the frequency.

SHOCK absorber for prevention of surges if pumps are switched on suddenly. a
absorber of surges is placed close to the pump outlet .

Surge Arresters / Pipeline Water Hammer | Contact Information