Shock Alleviater

SHOCK Alleviater suppresses water hammer from reverse flow immediate stopping,
by increasing cushion resistances to the returning quantity of fluid.

SHOCK Alleviater alleviates fluctuating flow gradually, preventing hammer,
by progressively slowing the liquid; EX, a time increase reduces SHOCK level.

SHOCK Alleviater attenuates the SHOCK from pump motor spin-up and pipe shake.
when there is no controlled throttle returning to inlet, in circuit.

SHOCK Alleviater applications compensating for liquid expansion by temperature
, so that there is a place for some to go into when system increases.

SHOCK Alleviater for attenuating a flow SHOCK in pipe that is being shaken,
stops the vibration by de-tuning the nodes, softness lowering the frequency.

SHOCK Alleviater for prevention of surges if pumps are switched on suddenly.
a Alleviater of surges is placed close to the pump outlet .

SHOCK Alleviater dampens system peak pressures whilst quickly starting-up,
when placed instead of a back flow bypass, which would be returning the
instantaneous excess.

SHOCK Alleviater reduces transients from quick valve closure, safety shut-down
are of greatest effect, put on a Tee in front of the slammer.

Shock Alleviaters

SHOCK Alleviaters attenuate hammer from reverse flow on sudden shut-down,
by being increasing resistances to the quantity of fluid coming back.

SHOCK Alleviaters alleviate flow fluctuation gradually, prevent water hammer.
by progressively arresting the liquid; IE over more time.

SHOCK Alleviaters suppress the SHOCK from fast motor spin-up of rotary pumps,
when a controlled throttle, returning to inlet, is not in circuit.

SHOCK Alleviaters often used in compensation for falling temperatures,
so that there is a place for some to come from when the volume decreases.

SHOCK Alleviaters for attenuation of a SHOCK in piping with jerking fluids,
work by cushioning the mass oscillation to stabilize the reciprocation.

SHOCK Alleviaters for evening out the SHOCK when your pumps are switched on,
these Alleviaters of SHOCK are connected close after pump outlet check valve.

SHOCK Alleviaters damping system over-pressure during quick start-up,
by being in place of flow back bypasses, normally returning to source.

SHOCK Alleviaters stop transient from valve slam, quick isolation,
are of greatest effect, put on a Tee in front of the slammer.

Surge Arresters / Pipeline Water Hammer | Contact Information