Shock Attenuaters

SHOCK Attenuaters attenuate hammer from reverse flow on sudden shut-down,
by being increasing resistances to the quantity of fluid coming back.

SHOCK Attenuaters alleviate flow fluctuation gradually, prevent water hammer.
by progressively arresting the liquid; IE over more time.

SHOCK Attenuaters suppress the SHOCK from fast motor spin-up of rotary pumps,
when a controlled throttle, returning to inlet, is not in circuit.

SHOCK Attenuaters often used in compensation for falling temperatures,
so that there is a place for some to come from when the volume decreases.

SHOCK Attenuaters for attenuation of a SHOCK in piping with jerking fluids,
work by cushioning the mass oscillation to stabilize the reciprocation.

SHOCK Attenuaters for evening out the SHOCK when your pumps are switched on,
these Attenuaters of SHOCK are connected close after pump outlet check valve.

SHOCK Attenuaters damping system over-pressure during quick start-up,
by being in place of flow back bypasses, normally returning to source.

SHOCK Attenuaters stop transient from valve slam, quick isolation,
are of greatest effect, put on a Tee in front of the slammer.

Shock Attenuater

SHOCK Attenuater suppresses water hammer from reverse flow immediate stopping,
by increasing cushion resistances to the returning quantity of fluid.

SHOCK Attenuater alleviates fluctuating flow gradually, preventing hammer,
by progressively slowing the liquid; EX, a time increase reduces SHOCK level.

SHOCK Attenuater attenuates the SHOCK from pump motor spin-up and pipe shake.
when there is no controlled throttle returning to inlet, in circuit.

SHOCK Attenuater applications compensating for liquid expansion by temperature
, so that there is a place for some to go into when system increases.

SHOCK Attenuater for attenuating a flow SHOCK in pipe that is being shaken,
stops the vibration by de-tuning the nodes, softness lowering the frequency.

SHOCK Attenuater for prevention of surges if pumps are switched on suddenly.
a Attenuater of surges is placed close to the pump outlet .

SHOCK Attenuater dampens system peak pressures whilst quickly starting-up,
when placed instead of a back flow bypass, which would be returning the
instantaneous excess.

SHOCK Attenuater reduces transients from quick valve closure, safety shut-down
are of greatest effect, put on a Tee in front of the slammer.

Surge Arresters / Pipeline Water Hammer | Contact Information