Shock Preventers

SHOCK preventers for evening out the SHOCK when your pumps are switched on,
these preventers of SHOCK are connected close after pump outlet check valve.

SHOCK preventers for suppression of a SHOCK in piping with jerking fluids,
work by cushioning the mass oscillation to stabilize the reciprocation.

SHOCK preventers stop transient from valve slam, quick isolation,
are of greatest effect, put on a Tee in front of the slammer.

SHOCK preventers damping system over-pressure during quick start-up,
by being in place of flow back bypasses, normally returning to source.

SHOCK preventers attenuate hammer from reverse flow on sudden shut-down,
by being increasing resistances to the quantity of fluid coming back.

SHOCK preventers suppress the SHOCK from fast motor spin-up of rotary pumps,
when a controlled throttle, returning to inlet, is not in circuit.

SHOCK preventers alleviates fluctuating flow gradually, preventing hammer,
by progressively arresting the liquid; IE over more time.

SHOCK preventers often used in compensation for falling temperatures,
so that there is a place for some to come from when the volume decreases.

Shock Preventer

SHOCK preventer suppresses the SHOCK from pump motor spin-up and pipe shake.
when there is no controlled throttle returning to inlet, in circuit.

SHOCK preventer alleviates fluctuating flow gradually, preventing hammer,
by progressively slowing the liquid; EX, a time increase reduces SHOCK level.

SHOCK preventer applications compensating for liquid expansion by temperature
, so that there is a place for some to go into when system increases.

SHOCK preventer for suppressing a flow SHOCK in pipe that is being shaken,
stops the vibration by de-tuning the nodes, softness lowering the frequency.

SHOCK preventer for prevention of surges if pumps are switched on suddenly. a
preventer of surges is placed close to the pump outlet .

SHOCK preventer dampens system peak pressures whilst quickly starting-up, when
placed instead of a back flow bypass, which would returning the instantaneous
excess.

SHOCK preventer reduces transients from quick valve closure, safety shut-down
are of greatest effect, put on a Tee in front of the slammer.

SHOCK preventer attenuates water hammer from reverse flow immediate stopping,
by increasing cushion resistances to the returning quantity of fluid.

Surge Arresters / Pipeline Water Hammer | Contact Information